This MC4 in-line fuse holder, with fuse, is designed to provide over-current protection for solar arrays. The use of a fuse can protect your solar array from unnecessary damage from an over-current event, in particular for panels wired in parallel (or strings of panels wired in series that are then paralleled together)
Typically smaller panel systems found on most boats you don't need an in-line MC4 fuse assuming the wiring is sized correctly (10AWG is typically OK). That said this is a summary:
1 panel to 1 MPPT controller - in-line MC4 fuse not required
2 panels wired in parallel to 1 MPPT controller - in-line MC4 fuse not required
3 panels wired in parallel to 1 MPPT controller - in-line MC4 fuse is required
4 panels wired in parallel to 1 MPPT controller - in-line MC4 fuse is required
Any questions if you need an in-line MC4 fuse please contact us.
MC4 In-line Fuse
- Length - 5.12"
- Compatible with MC4 solar connectors
- Includes 1 fuse
- Fuse replacement is quick and easy (Simply unscrew the Solar Connector Fuse Holder to remove and replace the blown fuse.)
- Waterproof and dustproof
- Maximum Voltage: 1000 VDC
- Temperature range: -40°C+90°C
