The SmartSolar 100|30 is designed to accept solar panel (PV) input up to 440W at 12V or 880W at 24V and has a rated charge current of 30A.
However, you should note both the open circuit voltage (Voc) and the short circuit current (Isc) of your combined solar panels and ensure this does not exceed the maximum input of the MPPT charge controller. For the 100|30 the maximum PV open circuit voltage (Voc) is 100V and the maximum PV short circuit current (Isc) is 35A. If you are unsure let us help you size the correct MPPT charge controller.
* Remember when wiring solar panels in series: voltage increases and amps stays the same & when wiring in parallel: voltage stays the same and amps increases
Auto-selects 12/24V on the output. The charge controller once connected will automatically recognise your battery bank voltage.220W
Bluetooth Monitoring built-in. Remotely control and monitor the extensive features of your SmartSolar MPPT charge controller with built-in bluetooth by pairing it with your smartphone or tablet via the VictronConnect app. (Bluetooth dongle not required)
Check out our news story "Your Victron MPPT controller & app explained" for additional product info
SmartSolar MPPT 100 | 30
Victron Energy SmartSolar MPPT 100 | 30
Dimensions: (H x W x D) 130 x 186 x 70 mm
Weight: 1.3 kg
Power terminals: 16 mm² / AWG6
Protection: IP43 (electronic components), IP22 (connection area)
Battery voltage: 12/24V Auto select
Rated charge current: 30A
Nominal PV power, 12V: 440W
Nominal PV power, 24V: 880W
Nominal PV power, 48V: n. a.
Max. PV short circuit current: 35A
Maximum PV open circuit voltage: 100V
Charge voltage 'absorption' 14.4V / 28.8V (adjustable)
Charge voltage 'float' 13.8V / 27.6V (adjustable)
Download spec sheet for full product detail