The MPPT Control connects to your MPPT charge controller and provides a digital display. It lets you see the status and modify the setup of all Victron Energy MPPT solar charge controllers (BlueSolar & SmartSolar) that use a VE.Direct communications port (all except 150/70 and 150/85).
The MPPT Control is mounted in the BMV-700 series housing, maintaining a consistent and professional look to your panels. It can be flush mounted in a 52mm (2") hole, or an optional mounting box is available.
Download spec sheet for full product detail
Note: The MPPT Control includes a VE.Direct cable, please choose the length required from 6' (1.8m) to 33' (10m)
Note: This VE.Direct cable doubles as your power cable. The supplied power cable with inline fuse is only required when using the Victron MPPT 75|50, 100|50 or 150|35.
Victron MPPT Control
Features
• View live status information
• View historical information
• All-time values
• 30-day historical values
• MPPT setupA few of the values that can be displayed are:
• Panel power
• Panel voltage
• Yield today
• Charger state
• Battery current
• Battery voltage
• Load output state & current (when function is supported by controller)
• Maximum panel voltage
• Maximum power per day
• Maximum battery current
• Maximum battery voltage
• Minimum battery voltage
• Time spent in bulk, absorption, and float per dayThe control can also be used to set the following parameters:
• Battery type
• Maximum allowed current Bulk time limit
• Absorption time limit
• Absorption voltage
• Float voltage
• Temperature compensation
• Load output (when function is supported by controller)
• Load switch low & high (when function is supported by controller)